DB’s & Control Panel Assembling

    •   Swimming Pool, Fountain & Irrigation Panel Boards
    •   Main Distribution Boards
    •   Sub Main Distribution Boards
    •   Final Distribution Boards
    •   Motor Control Panels
  •   Pump Control Panels
  •   VFD Control Panels
  •   HVAC Control Panels
  •   Power Factor Improvement Panels
  • Generator synchronizing & Control Panels
  • Capacitor Banks with Harmonic Filters
  • Soft Starter Panels
  • Meter Cabinets
  • AHU Panel
  • Manual / Automatic Change Over Panels
  • EPS Cutting Machines
  • Remote Control Systems

Swimming Pool, Fountain & Irrigation Panel Boards

We are one of only several companies who specialise in the design, construction and installation of swimming pool, sauna, steam and wellness room control panels filtration control systems and underwater lighting. We can build control panels for a vast spectrum of applications and requirements and can supply both ready made off the shelf control panels and bespoke custom designed and built panels made to your exact requirements

Main Distribution Boards

Power Distribution is a system, consisting of a Main Distribution Board (MDB), Sub Main Distribution Boards (SMDBs) and Final Distribution Boards, by which the electrical energy is transmitted via branches to reach the exact end user.

An MDB is a panel or enclosure that houses the fuses, circuit breakers and ground leakage protection units where the electrical energy, which is used to distribute electrical power to numerous individual circuits or consumer points, is taken in from the transformer or an upstream panel. An MDB typically has a single or multiple incoming power sources and includes main circuit breakers and residual current or earth leakage protection devices. A MDB is comprised of a free standing enclosure, a bus bar system, MCCB’s, metering and support equipments and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section.

Capacitor Banks with Harmonic Filters

alawaielectricalhas a wide experience in power quality solutions, which allows us to provide studies, specialized services, and custom engineering services to ensure network code compliance, minimize system losses, and maintain power systems at optimum performance without affecting equipment life cycle. alawaielectricalis highly specialized in electrical engineering for harmonics filtering and reactive power compensation systems at low, medium, and high voltages levels.

Generator synchronizing & Control Panels

Synchronizing panel will operate on an automatic mains failure system, so that when the main supply is interrupted on one or all phases (after an adjustable delay period) the generator sets will start-up together. After an initial warm-up period (adjustable) the generators will synchronize with each other by means of motorized circuit breakers or contactors onto a common busbar. Next, the motorized change-over switch will be closed and the load will be connected to the main distribution box.

Sub Main Distribution Boards

The MDB then feeds SMDBs, which is installed generally at the point where a large distribution cable terminates and several smaller sub-circuits start. These are the switchboards that although similar construction, are larger than a final distribution board circuit. The boards are installed midway through the power distribution system, at the point in a large distribution cable ends, and several smaller starting sub-circuits.

Soft Starter Panels

A soft start panel is a control system that reduces the amount of torque delivered to the power train of an AC electric motor. In an electric application, the soft starter temporarily reduces the current input or voltage. It can also affect how the motor receives power through the electrical circuit. In pump applications soft start panels are valued because they ward off pressure surges. The soft start panel can be electrical or mechanical or both. A clutch, fluid drive, shot coupling or other devices may be used as soft start panels. These starts offer ultimate protection and light load energy efficiency.

Final Distribution Boards

A Final Distribution Board (FDB) is an assembly of protective devices, including two or more fuses or circuit breakers, arranged for the distribution of electrical energy to the final circuits. It consists of a suitable enclosure containing suitable facilities for mounting fuses and/or circuit breakers and other protective devices (such as residual current circuit breakers/devices which may, or may not, provide integral overcurrent protection) and other switching and control devices. An FDB will also contain ‘busbars’ for interconnecting the circuit breakers or fuses along with neutral and earth bars for connecting the incoming and outgoing neutral conductors and protective conductors. This enclosure may be either all insulated type or metal clad construction

Meter Cabinets

Meter cabinets make assembly of metering systems easier and quicker. They also contribute to metering system reliability. Meter cabinets considerably simplify the installation of AMR system due to bench testing and alignment at the manufacturer’s plant.

Meter cabinet with ALPHA meters, modems, adaptors and other comminication equipment.

Meter cabinets with AMR Server, workstation, RTU (data acquisition, processing and communication controllers), modem pool, UPS, climate control.

Motor Control Panels

Designed to your specific requirements

We have the experience to design motor control centres and control panels to your specific requirements. Utilising soft start units, variable speed drives, (Inverters), PLC’s, interfacing with instrumentation and providing telemetry.

AHU Panel

We are offering HVAC Control Panels and HVAC Electric Control Panel, AHU control panels, Heating, Ventilation And Air-Conditioning (HVAC) Systems control panels.

The following actions detail how engineers can design a quality system that is cost-competitive with traditional ventilation designs, while successfully providing an appropriate quantity and quality of outdoor air, lower energy costs, and easier maintenance.

Pump Control Panels

pump control panels and starters are made with current sensing technology so they provide accurate and reliable protection to motor of any horse power rating.

FEATURES

  • Microcontroller based software Technology
  • Model to suit every single / three phase range
  • Calibrated Digital Voltmeter & Ammeter
  • Electrical safety from all electrical fault

Manual / Automatic Change Over Panels

In the event of a power outage, our changeover panels are designed to transfer the supply to an emergency backup supply, either manually or automatically depending on the need of the application. Manufactured from 16A up to and including 4000A. If you require more information, submit an enquiry and one of our design engineers will contact you shortly.

VFD Control Panels

Sometimes your work space is dusty, dirty, wet, humid, corrosive, or hot. In those harsh environments, you cannot just mount your VFD exposed. You need a VFD Control panel – an enclosure that protects the VFD and other electric components.

What is a VFD control panel used for?

Keeping all components in one panel

Keeping dust, dirt, and weather out of electrical parts

A complete motor control solution (bypass, harmonic filtering, etc.)

EPS Cutting Machines

Alawaielectrical controlled hot wire cutting systems. These machines make it possible to cut practically all the Thermo-fusible foams, but also plastic materials of small thickness. Over the years, we have built the internal components of these systems. Our philosophy is to supply not only machines, but also complete means corresponding to the needs of our customers, either by a very wide range, by special machines on specifications or by our experience.

HVAC Control Panels

Our pre-assembled HVAC Control Panels help system integrators streamline the installation process and reduce unnecessary costs associated with manual field assembly. At Johnson Controls, our HVAC Control Panels feature agency-compliant standard and custom turnkey solutions designed to provide a solid protection package for the intelligent devices within your system. Choose from our Metasys® Series, Facility Explorer Series and our Custom Panels.

Remote Control Systems

Welcome to alawaielectrical dedicated remote control systems department, where we’re proud to offer one of the largest ranges of exceptional remote control systems. Our range of modern remote control systems are ideal for a range of switching applications, including; Garden Lighting, Garage Doors, Light Switching, Industrial Controls and Clay Shooting Traps.

Power Factor Improvement Panels

Automatic Power factor correction panel.APFC panels for low voltage applications.Automatic Power factor correction panel is fully automatic in operation and can achieve desired power factor under fluctuating load conditions